Nema 17 (42mm) nga motika stepper kati-koropiko
>> Whakaahuatanga Poto
| Momo Motini | takairuarua |
| Koki Hipanga | 1.8° |
| Ngaohiko (V) | 2 / 2.5 |
| Nāianei (A) | 2.5 / 2.5 |
| Ātete (Ohms) | 0.8 / 1 |
| Te rewa (mH) | 1.8 / 2.8 |
| Waea Arataki | 4 |
| Pupuri Torque (Nm) | 0.5 / 0.6 |
| Roa Motini (mm) | 48 / 60 |
| Kaiwaehere | 1000CPR |
| Te Paemahana Ambient | -20℃ ~ +50℃ |
| Te Hinga o te Pawera | 80K Max. |
| Te Kaha Dielectric | 1mA Max.@ 500V, 1KHz, 1Sec. |
| Ātete Wehenga | 100MΩ Min.@500Vdc |
>> Tiwhikete
>> Tawhā Hiko
| Rahi Motini | Ngaohiko/ Wāhanga (V) | o nāianei/ Wāhanga (A) | Ātete/ Wāhanga (Ω) | te whakaawe/ Wāhanga (mH) | Tau o Waea Arataki | Rotor Inertia (g.cm2) | Pupuri Torque (Nm) | Roa Motika L (mm) |
| 42 | 2 | 2.5 | 0.8 | 1.8 | 4 | 70 | 0.5 | 48 |
| 42 | 2.5 | 2.5 | 1 | 2.8 | 4 | 105 | 0.6 | 60 |
>> Tawhā hangarau whānui
| Whakawātea irirangi | 0.02mm Max (450g uta) | Te parenga whakaahuru | 100MΩ @500VDC |
| Whakawātea axial | 0.08mm Max (450g uta) | Te kaha dielectric | 500VAC, 1mA, 1s@1KHZ |
| Te kawenga torotoro teitei | 25N (20mm mai i te mata flange) | Te karaehe whakamaarama | akomanga B (80K) |
| Max kawenga axial | 10N | Te pāmahana ambient | -20℃ ~ +50℃ |
>> 42IHS2XX-2.5-4A motini tuhi whakahuahua
| whirihoranga titi (Rerekēta) | ||
| Pin | Whakaahuatanga | Tae |
| 1 | +5V | Whero |
| 2 | GND | Mā |
| 3 | A+ | Pango |
| 4 | A- | Kahurangi |
| 5 | B+ | Kōwhai |
| 6 | B- | Kakariki |
>> Whakaaturanga Kamupene
Ko o tatou hua nekehanga raina e whakamahia nuitia ana i roto i nga taputapu rongoa, taputapu taiwhanga, korero, semiconductors, automation me etahi atu tono e hiahia ana kia tika te nekehanga raina.
Ko a maatau hua e hipoki ana i nga waahanga nati a te ACME, nga motuka hiko hikoi a ACME, nga motuka hikoi hikoi, nga motuka hikoi hurihuri, nga motuka hikoi hikoi, nga motuka hikoi katinga-kati, nga motuka hiko o te aorangi, me nga momo momo waahanga me nga nekehanga raina kua whakaritea. hua.
E whakapono ana matou ko te tangata te tino rauemi a te kamupene, ka piri ki te kaupapa e aro nui ana ki te tangata, kia whai waahi nga kaimahi ki te noho haumaru, hauora, noho humarie ki te mahi, kia angitu tahi ratou me te kamupene.
