Nema 14 (35mm) nga motika stepper kati-koropiko
>> Whakaahuatanga Poto
| Momo Motini | takairuarua |
| Koki Hipanga | 1.8° |
| Ngaohiko (V) | 1.8 / 2.9 |
| Nāianei (A) | 1.5 |
| Ātete (Ohms) | 1.23 / 1.9 |
| Te rewa (mH) | 1.4 / 3.2 |
| Waea Arataki | 4 |
| Pupuri Torque (Nm) | 0.14 / 0.2 |
| Roa Motini (mm) | 34 / 47 |
| Kaiwaehere | 1000CPR |
| Te Paemahana Ambient | -20℃ ~ +50℃ |
| Te Hinga o te Pawera | 80K Max. |
| Te Kaha Dielectric | 1mA Max.@ 500V, 1KHz, 1Sec. |
| Ātete Wehenga | 100MΩ Min.@500Vdc |
>> Tiwhikete
>> Tawhā Hiko
| Rahi Motini | Ngaohiko /Wāhanga (V) | o nāianei /Wāhanga (A) | Ātete /Wāhanga (Ω) | Te whakaahuru /Wāhanga (mH) | Tau o Waea Arataki | Rotor Inertia (g.cm2) | Pupuri Torque (Nm) | Roa Motika L (mm) |
| 35 | 1.8 | 1.5 | 1.23 | 1.4 | 4 | 20 | 0.14 | 34 |
| 35 | 2.9 | 1.5 | 1.9 | 3.2 | 4 | 30 | 0.2 | 47 |
>> Tawhā hangarau whānui
| Whakawātea irirangi | 0.02mm Max (450g uta) | Te parenga whakaahuru | 100MΩ @500VDC |
| Whakawātea axial | 0.08mm Max (450g uta) | Te kaha dielectric | 500VAC, 1mA, 1s@1KHZ |
| Te kawenga torotoro teitei | 25N (20mm mai i te mata flange) | Te karaehe whakamaarama | akomanga B (80K) |
| Max kawenga axial | 10N | Te pāmahana ambient | -20℃ ~ +50℃ |
>> 35IHS2XX-1.5-4A motini tuhi whakahuahua
| whirihoranga titi (Rerekēta) | ||
| Pin | Whakaahuatanga | Tae |
| 1 | GND | Pango |
| 2 | Vcc | Whero |
| 3 | Ch A+ | Kakariki |
| 4 | Ch A- | Paraone |
| 5 | Ch B- | Kerei |
| 6 | Ch B+ | Mā |
| whirihoranga titi (Rerekēta) | ||
| Pin | Whakaahuatanga | Tae |
| 1 | GND | Pango |
| 2 | Vcc | Whero |
| 3 | Ch A+ | Kakariki |
| 4 | Ch A- | Paraone |
| 5 | Ch B- | Kerei |
| 6 | Ch B+ | Mā |
| 7 | Ch Z+ | Kōwhai |
| 8 | Ch Z- | Karaka |
>> Mo matou
Ko Thinker Motion he kaiwhakarato otinga mo te nekehanga ahorangi rongonui.Kua paahitia e te kamupene te tiwhikete ISO9001, kua paahitia e ana hua te tohu RoHS me te CE, a he 22 nga patent hua.
I nga wa katoa ka waiho e matou nga hiahia o o taatau kaihoko ki te kaupapa matua me te whakapau kaha ki te whakarato ki o taatau kaihoko nga hua me nga ratonga kounga teitei.I tenei wa e mahi ana matou mo te 600 nga kaihoko.
E 8 nga miihini CNC, 1 te miihini miihini CNC, 1 te miihini tapahi waea, me etahi atu taputapu miihini.Ka taea e matou te mahi miihini te nuinga o nga waahanga kore-paerewa na matou ake i roto i te whare ki te whakapoto i te wa arahi o nga hua kua whakaritea, me te whakarato i te wheako hoko pai ki o taatau kaihoko.I te nuinga o te wa, ko te wa arahi o a maatau hua motuka hikoi i roto i te 1 wiki, a ko te wa arahi o te tiwiri poroporo he 10 nga ra.
